SE SERIES BACKHOE & EXCAVATOR COMPACTION WHEELS
Heavy-duty static compaction wheels for 21,000–35,999 lb backhoes and excavators.
The SUI SE Series is built for contractors who need a rugged trench-compaction attachment with greater carrier capacity and working-width options for utility, pipeline, site-work and backfill applications.
SE SERIES
Machine class: 21,000–35,999 lb
Standard widths: 12″–36″
21,000–35,999 LB
Machine operating class
12″–36″
Standard width range
WEDGE PAD / SHEEPSFOOT
Pad configurations
NO SPECIAL HYDRAULICS
Simple static operation
SEVERE-DUTY COMPACTION FOR BACKHOES & EXCAVATORS
The SE Series covers carriers from 21,000–35,999 lb and expands the SUI compaction-wheel range to larger backhoes and excavators while maintaining the same rugged construction approach.
- AR400 wear points at high-wear contact areas
- Double tapered roller bearings
- Self-cleaning design helps reduce soil buildup
- Removable mounting plate supports machine-to-machine versatility
- Wedge Pads standard; sheepsfoot available
- Custom wheel widths available for job-specific requirements
BOTTOM-UP COMPACTION
Wheel penetration works through the lift, helping reduce soil bridging and voids while processing and compacting backfill.
COHESIVE SOIL PROCESSING
The wheel’s shearing and kneading action can help break up clay and remix cohesive material during trench backfill.
STATIC, SIMPLE OPERATION
The wheel installs in place of the bucket and does not require a special hydraulic power system.
SE SERIES APPLICATIONS
Designed for medium-size backhoes and excavators working in demanding trench, utility and site-development applications.
UTILITY & PIPELINE TRENCHES
Compact backfill in water, sewer, gas, electrical and pipeline trench applications using the carrier already performing excavation.
ROAD & SITE DEVELOPMENT
Use the SE Series for larger repair excavations, roadway work and commercial site-development backfill.
FOUNDATIONS & STRUCTURAL BACKFILL
Static wheel compaction can be effective in confined foundation and structural backfill areas where carrier reach is valuable.
CLAY & MIXED BACKFILL
The rolling, shearing and kneading action helps process cohesive soils while the wheel compacts through the lift.
HOW TO SELECT YOUR SE SERIES COMPACTION WHEEL
Start with the carrier operating weight, then confirm wheel width, mounting arrangement and pad configuration with SUI.
1. CONFIRM THE CARRIER
Provide the backhoe or excavator manufacturer, model and operating weight. The SE Series covers 21,000–35,999 lb carriers.
2. MATCH THE WORKING WIDTH
SE Series standard widths run from 12″ to 36″. Match the wheel to trench width, lift conditions and project requirements.
3. CONFIRM MOUNT & PAD
Provide direct pin-on or coupler information and select standard Wedge Pads or optional sheepsfoot based on the application.
NEED A CUSTOM SE WHEEL?
Steel Unlimited can manufacture custom SE Series widths and configurations when a standard wheel does not match the carrier or job.
MACHINE CLASS
21,000–35,999 lb
TYPICAL CARRIERS
Backhoes / Excavators
STANDARD WIDTH RANGE
12″–36″
WEAR MATERIAL
AR400 wear points
BEARING SYSTEM
Double tapered roller bearings
PAD OPTIONS
Wedge Pads standard / sheepsfoot available
MOUNTING
Removable mounting plate; confirm carrier fitment
HYDRAULICS
No special hydraulic system required
CUSTOMIZATION
Custom widths and special-order wheels available
SE SERIES AT A GLANCE
Published SE Series specifications currently available from Steel Unlimited. Exact dimensions and fitment should be confirmed before ordering.
WHY USE A STATIC COMPACTION WHEEL ON A BACKHOE OR EXCAVATOR?
COMPACTS THROUGH THE LIFT
An open compaction wheel can penetrate into the lift instead of only acting at the surface, helping reduce bridging and unprocessed material.
NO AUXILIARY HYDRAULIC CIRCUIT
The SE Series works through carrier movement and downforce, so no special vibratory hydraulic system is required.
BACKFILL + COMPACT
The integrated plate can help move and level material so the operator can perform more trench-backfill work with one attachment.
Compaction results vary with soil, moisture, lift thickness, carrier, wheel selection and project requirements. Follow job specifications and field density testing where required.
SE SERIES FAQ
Answers to common backhoe and excavator compaction-wheel selection questions.
WHAT MACHINES DOES THE SUI SE SERIES FIT?
The current published SE Series machine class is 21,000–35,999 lb and is intended for backhoes and excavators. Confirm the exact carrier make/model and mounting arrangement before ordering.
WHAT SE SERIES WIDTHS ARE AVAILABLE?
Steel Unlimited currently publishes standard SE Series wheel widths from 12″ to 48″. Custom widths can be manufactured for job-specific requirements.
DOES THE SE SERIES REQUIRE HYDRAULICS?
No special hydraulic power system is required. The static wheel installs in place of the bucket using the machine’s attachment arrangement.
WEDGE PAD OR SHEEPSFOOT?
Wedge Pads are the standard SUI configuration going forward, with sheepsfoot available as an option. Selection should be based on soil and job requirements.
CAN SUI BUILD A CUSTOM SE SERIES WHEEL?
Yes. Steel Unlimited offers special-order and custom compaction-wheel widths and configurations upon request.
WHAT SHOULD I SEND SUI FOR A QUOTE?
Provide machine manufacturer/model, operating weight, desired wheel or trench width, direct pin-on or coupler information, preferred pad style and job location.
READY TO SPEC YOUR SE SERIES WHEEL?
Send SUI your carrier make/model, operating weight, desired wheel width, mount information and pad preference for a fitment recommendation and quote.
(800) 544-6453
Manufacturing: 3200 Myers Street, Riverside, CA 92503